CRAWLER DRILL MACHINE

is a hydraulic or pneumatic rock or ground drill used to make horizontal holes in civil engineering work , construction sites for making holes in rocks for setting explosives, tunnel construction,mining and other electrical purposes. It is mounted on a feed, which is like a rail that the drill travels on or drifts. This kind of drilling procedure is also called drifting. The feed is usually attached with a flexible boom (like an arm) to a stationary or mobile unit that contains the power pack (engine and hydraulic pump or compressor). Drifters are used in miningconstructionexploration, and natural science. Our crawler drills are highly valued for their accurate and speedy drilling technology

TRAILER.JPG

LOW LOADER TRUCK TRAILER

Low Loader truck trailer is a semi-trailer with two drops in deck height: one right after the gooseneck and one right before the wheels. This allows the deck to be extremely low compared with other trailers. It offers the ability to carry legal loads up to 12 ft (3.66 m) tall, which other trailers cannot. Lowboys are used to haul heavy equipment such as bulldozers, industrial equipment etc.

TRUCK LOADER TELESCOPIC BOOM CRANE

Hydraulic truck cranes are mobile cranes that can lift thousands of pounds using hydraulics. Hydraulics relies on forces being transmitted through oil pushing the boom’s pistons in opposite directions to lift thousands of pounds.

Hydraulic truck cranes are essential to building major projects: bridges, buildings, airports, roadways, and more. What would take hundreds of men and hours to accomplish, a crane can do in minutes.

DUMPER TRUCKS

Heavy trucks are the largest on-road trucks. These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling,

A dump truck is a truck used for transporting loose material (such as sandgravel, or demolition waste) for construction. A typical dump truck is equipped with an open-box bed, which is hinged at the rear and equipped with hydraulic rams to lift the front, allowing the material in the bed to be deposited on the ground behind the truck at the site of delivery. truck and pup is very similar to a transfer dump. It consists of a standard dump truck pulling a dump trailer. The pup trailer, unlike the transfer, has its own hydraulic ram and is capable of self-unloading.

CRAWLER EXCAVATORS

Excavation projects require the digging power and productivity of full-sized excavators.  Excavators are typically rated by their operating weight which range from 19,000lbs-105,000lbs. .  Excavators are easy to use and can be equipped with a wide variety of buckets and thumbs.  Common applications include digging out foundations and footings for buildings, basement excavation, loading trucks, demolition, digging in water lines, ditching and much more.

 

 

BACK HOE LOADER

Backhoe loaders are very common and can be used for a wide variety of tasks: construction, small demolitions, light transportation of building materials, powering building equipment, digging holes/excavationlandscaping, breaking asphalt, and paving roads. Often, the backhoe bucket can also be replaced with powered attachments such as a breakergrappleauger, or a stump grinder. Enhanced articulation of attachments can be achieved with intermediate attachments such as the tilt rotator. Many backhoes feature quick coupler mounting systems and auxiliary hydraulic circuits for simplified attachment mounting, increasing the machine's utilization on the job site. Some loader buckets have a retractable bottom enabling it to empty its load more quickly and efficiently. Retractable-bottom loader buckets are also often used for grading and scraping. The front assembly may be a removable attachment or permanently mounted

MINI BACK HOE LOADER

The mini loader backhoe is a compact yet powerful excavator.  It’s ideal for landscaping and nursery projects, sewage system and septic tank excavating, water and power line trenching, and many other excavating projects.

Using quick mount system, this mini backhoe is quick and easy to attach.  The  standard part of the backhoe are the independent operator’s seat and hydraulic controls.

SKID STEER

Skid steers help contractors and homeowners efficiently take on a wide variety of projects with one machine.  Switching between attachments is generally quick and easy with no tools required.  Many skid steers and CTLs are equipped with hydraulic quick attach systems that allow the operator to switch between attachments without leaving the seat of the machine.

PASSENGER BUSES

Our fleet varies from 16 to 33 seater, which are widely used for the transportation of staffs ,goods etc. Buses may be used for scheduled bus transportscheduled coach transportschool transport, private hire, or tourism; promotional buses may be used for political campaigns and others are privately operated for a wide range of purposes.

PICK UP'S

A pickup truck is a light duty truck having an enclosed cab and an open cargo area with low sides and tailgate.  pickup trucks are used primarily for passenger transport, agriculture, and commercial uses, pickups are also used in law enforcement, the military, fire services, and for pickup truck racing, a form of auto racing using modified versions of pickups mostly on oval tracks.

DIESEL TANKER

The provided tanker is extensively used in power plants, diesel stations and other places. Additionally, our valued patrons can avail this tanker from us according to their requirements. The key features include sturdy construction, long working life, leak proof, high temperature resistant, horizontal orientation, level indicator, etc… The maximum storage capacity is 3800 liters of Diesel.

TRAILER MOUNTED BOOM LIFT

For the ultimate in reach and range, the Genie  trailer mounted boom lift offers outstanding up, out and over capabilities in a compact, lightweight package that is easy to maneuver in congested work areas. Optional Drive and Set feature lets operators drive the unit from the platform when fully lowered. And having Illuminated outrigger indicators and Tilt alarm/sensor for added safety, providing with a 359˚non-continuous turntable rotation for versatile positioning. To simplify operation, ground and platform controls use symbols.

WINCH MACHINE

A winch is a mechanical device that is used to pull in (wind up) or let out (wind out) or otherwise adjust the tension of a rope or wire rope (also called "cable" or "wire cable"). In its simplest form, it consists of a spool and attached hand crank. In larger forms, winches stand at the heart of machines as diverse as tow truckssteam shovels and elevators. The spool can also be called the winch drum. More elaborate designs have gear assemblies and can be powered by electric, hydraulicpneumatic or internal combustion drives. Some may include a solenoid brake and/or a mechanical brake or ratchet and pawl device that prevents it from unwinding unless the pawl is retracted.